Aluminum Wire Drawing Machine Inlet 3.0 To 3.5mm Outlet 0.6 To 2.5mm CCA Wired Drawing Machine

17IWD Al/CCA wire Intermediate drawing machine 

1,Main technique parameter:

1. Usage: Aluminum/CCAwire

2. Inlet diameter: 3.0-3.5mm

3. Outlet diameter: 2.5mm-0.6mm

4. Maximum drawing speed: 1200m/min

5. Dies number: 17 (Customer self provided) 30mm*8

6. Mechanism surface reduce rate:

From No.1 to No.16 18%

No.17 12.5%

7. Drawing method: 4 shafts horizontal arrangement; sliding continuous drawing

8. Drive motor: 37KW/AC frequency converter control

9. Spooler motor: 11KW/AC frequency converter control

10. Frame: Ironed cast

11. Transmission: All transmission by flat belts; main motor lubricated by petroleum

12. Capstan: four-tier capstan; tungsten carbide (6 months of guarantee)

13. Lubrication system: Spray type; lubrication oil 100 liter/min (without water pump)

14. Spooler: Without shaft;

Automatically pneumatic brake when wire is broken;

Single shaft fixed with screw (manually self-lock)

Manual hydraulic unloading (with loading & unloading cart)

15. Spool dimension: 500/630mm

Outer diameter	Inner diameter	Outer wide	Inner wide	Bore diameter	Position bolt
630	360	430	400	127	200
500	360	346	322	127	200

16. Capacity for wire receiving: 200-500KG

17. Traversing unit:

Traversing system: 90W low speed reversible motor type;

Traversing width: 480mm/Max

18. Spooling tension control: Pneumatic balance automatically controls spooling tension (pneumatic source provided by customer self)

 

 

 

 

 

 

More options

 

 

 

 

RBD-400/13 Capstan Type Aluminum rod Breakdown Machine

RBD-400/13 Aluminum rod breakdown machine is used to draw Φ9.5mm ordinary aluminum rod into Φ1.7mm-Φ4.5mm wire, Drawing capstans are arranged in a line. Fixed speed capstan and other twelve drawing capstans are controlled by two electric motors respectively. It is with quickly change dies system.

1. Main technical parameters:

1.1 Max inlet diameter: Φ9.5mm

1.2 Outlet diameter: Φ1.7mm-Φ4.5 mm

1.3 Max. drawing speed: 25m/s

1.4 Diameter of drawing capstan: Φ400

1.5 Max. No. of drawing dies: 13 dies

1.6 Size of drawing dies: Φ38×25

1.7 Max storage capacity of wire accumulator: 8m

1.8 Motor power of drawing machine : 200KW AC

1.9 Motor power of fixed speed capstan: 55KW (AC)

1.10 Motor power of dual-spool take-up: 15KW*2 (AC)

2. Components of machine:

2.1 Pay-off stand with a rotating arm: 1 Set

2.2 Host drawing machine: 1 Set

2.3 Dancer: 1 Set

2.4 Double spooler take up 1 set

2.5 wire pointer machine: 1 Set

2.6 Electric control system and console : 1 Set.

 

 

More options

 

 

 

Compact and cost-effective

13D/400-Aluminium rod breakdown machine

1. usage

This machine mainly used to drawing Φ9.5mm ordinary AL- rod into φ1.7-φ3.0mm wire.With quick change die system.

2.Quick change die system-drawing die sheet:

Inlet 9.5mm,outlet 1.7-3.0mm

1	2	3	4	5	6	7	8	9	10	11	12	13
8.33	7.30	6.40	5.61	4.90	4.30	3.77	3.30	2.90	2.54	2.23	1.95	1.70

Quick change die system:For example, if you want to produce 2mm, you only remove 1.95 and 1.7, and put the 2mm at final drawing die seat;If you want to produce 3mm, you remove 2.90-2.54-2.23-1.95-1.70mm, put 3mm at final drawing die seat.)

Model	11/400	13/400	15/350
Inlet Dia.-mm	9.5	9.5	9.5
Outlet Dia.-mm	5.0-2.15	3.5-1.68	2.3-1.5
Draw No.	11	13	15
Last Pulley Dia.mm	400	400	350
Max speed m/s	12	15	15
Speed increasing ratio for last die	adjustable	adjustable	adjustable
Motor Power-KW	90KW+15KW	75KW+11KW	75KW+7.5KW
Take up	Single spool Takeup Dual spool Takeup	Single spool Takeup Dual spool Takeup	Single spool Takeup Dual spool Takeup
Features	Speed increasing ratio for last die be adjustable, no need to change all die setting for different size of product less die maintenance and cost-saving solution